PCB cutting machine
V-cut PCB separator
pcb depaneling router
PCB Depaneling machine
2 Meters Preheating Wave Solder(2)
Dual Wave solering  with External spray fluxer
Forced hot air convection 2 eters 3 section preheating
Self-cleaning titanium finger conveyor
Titanium solder pot ,Motorized width adjustment
Motorized solder pot in-out up-down
Energy saving mode save power and reduce solder dross
Windows 8 based user friendly operating system
PCBs up to 350mm400mm is standard


Please go to ASCEN headquarters to check more detail type machine: www.ascen.ltd
Application: 
Wave solder system with exterior spray fluxer, available with dual or single wave. 2 Meters long preheater with a total machine length of 4700mm. Computer control. Titanium-alloy solder pot, capacity of approximately 420 kilos lead free solder.

Features:
Variable-speed titanium finger conveyor for PCBs up to 350mm,400mm, 450mm, 500mm wide
Advanced external spray fluxer and filtration system with low pressure atomization
Dual-wave system with two variable-frequency controlled motors and independent adjustment of wave crest height
Automatic conveyor width adjustment and closed-loop control of conveyor speed
Energy-saving mode with automatic board detection and timer to turn off pump motors during periods of inactivity—saves power and reduces dross volume
Motor-drive and push-button control of up-down and in-out motion
420 kilos of lead free solder pot capacity
Windows 8 based user friendly operating system
Fully automatic startup and shutdown according to operator-specified dates and times

Technical Specifications:
Power: 3 φ 380 V,50 HZ or 3 ph 220V               Air Pressure: 0.4MPa
Total Power: 39.5 KW                                        Normal Working Power: 8-10 KW
Conveyor Speed: 0.5~2.2m/min                       Rail Adjust Angle: 4°~7° 
 Preheating Length: 2000mm                             Preheating Section 3 section independent control
Solder Pot Temp: Ambient~300°C                   Soldering Foot Length: Max10mm
Spray Gun Movement: step motor                     Flux Atomization Spray Gun: auto timing cleanning
Control: Windows 8 based PC+PLC+SSR         Exhaust Fan: 400W

Model No 20D350 20D400
Pin Conveyor Adjust Range 50~350mm(W) 50~400mm(W)
Solder Wave Wdith 360mm 410mm
Solder Capacity 300 kgs 420 kgs
Preheating Length 2 Meters 2 Meters
Dimension 4700(L)x1370(W)x1680(H)mm 4700(L)x1410(W)x1680(H)mm
Crate Dimension 5160(L)x1700(W)x2100(H)mm 5160(L)x1740(W)x2100(H)mm
Net Weight 1550 kgs 1600 kgs
Gross Weight 2050 kgs 2100 kgs
Options Available:
Top preheating, option item number: TP008
Selective spray fluxer, option item number: SF009
Second Titanium solder pot set, option item number: ST013
Second Stainless steel solder pot set, option item number: SS014
Second spray fluxer, option item number: SF012
Smaller solder pot, 370 kilos lead free solder for 400mm wide, 300 kilos lead free solder for 350mm wide, solder pot dimension: 1024*450*203mm, option item number: SP015
Dual nozzle spray system, main nozzle spray the whole surface, second nozzle is for supplementary spray to location of solder bridge and solder icicle, to reduce bad solder joint, option item number: DN016
Nitrogen soldering, option item number: NS017
 Note: 450mm wide, 500mm wide wave soldering can be custom made.
Note : Your information detail will not be published. Required fields are marked

*Verification code: 看不清?点击更换 if can't see, please click on change

Contact Us
Email: info@ascen.ltd
Skype: supplier889
Tel/Whatsapp:8613377777085
Address: Industrial zone,Chan town,Guangdong province.