LED board cutting machine Product Description:
LED board cutting from six pieces of the blade, the upper and lower two for a group, constitute a cutting unit. Are A, B, C, three groups. The cutting process is divided into three stages, group a blade to cut 40% of the circuit board, then B blade again from a blade cut groove Nian, again completed 40% of cutting quantity. Finally, by group C blade cutting last 20% and finishing, because every time the cutting amount is very small, so cut in the process of generating should force than the traditional a cut can reduce more than 80%, divide the smooth edge of the circuit board, plate surface is very smooth, do not twist does not become warped.
* As the low cutting force of the blade for the aluminum LED separator , it can prolong the working life of the blades and reduce the cost.
* This PCB depaneling machine can separate the LED panel with the component and won’t bend and twist after cutting.
* The platform can be filled with troughs to facilitate the storage of the divided substrates. The platform is optional for1.2 meters and 2.4 meters.
| Item | Scope of application | |
| Model number | ASC-700N | |
| Dimensions(L*W*H) | 1200*506*333mm (with 1.2M platform) | 2400*506*333mm (with 2.4M platform) |
| Cutting speed | 80/120/200/400mm/s | |
| Power | 60W | |
| PCB Board thickness | 0.2-2.5mm | |
| Maximum PCB board length | Unlimited | |
| Power Supply | 1P AC220V 50Hz or 110V/60Hz | |
| Weight | Approx.72Kg | Approx.88Kg |
| Note: Can customized the bigger cutting module for the LED aluminum board with high component. | ||
