ASCEN inserter radial tape feeder AF-R series | |
Component type | Electrolytic capacitor,Y capacitor,square capacitor,terminal,spring,bending resistance |
Component size | 2*2*2~15*15*30mm |
Cutting lead diameter | 0.3~1mm |
Cutting lead length | 3-6mm(can adjustable) |
Tape hole distance | 12.7m or 15mm (cannot be shared) |
Material type | Radial tape type material |
Feeding type | Motor drive |
Cutting lead function | Can adjust cutting lead length |
Forming function | Need customized die via lead distance |
Bending function | Can do the 90 degree bending (optional) |
Position way | Use segmentation slice |
Waste Tape recycle | Feeding wheel return back transfer |
Power | 24V |
Air pressure | 0.4~0.6Mpa |
Operation way | Keys operation |
Signal connection | SMEMA port |
communication mode | I/O port or independent control |
Control way | PLC control system |
Drive mode | Stepper motor |
Feeding speed | 1S |
Feeding precision | ±0.2mm |
Feeding detection function | If no component be detected over 3 sec. The machine will alarm |
Feeder test | 1000 times continuous feeding without abnormal |
Aging Test | No abnormality after continuous operation for 48 hours |
Life time | About 5 years |
Cutter life | 5 million times(cutting cutter is the consumables) |
Any question please email to: info@ascen.ltd |