PCB separator depaneling the PCB panel by 6 cutting wheel. The cutting process with the low stress because of the multiple cutting.suit for cutting LED aluminum PCB panel,LED copper substrate, LED light-emitting tube,display panel, LED T8 tube etc.
Features:
* there are Group A, B and C for the PCB separator, The whole cutting process is divided into 3 stages. The stress of the cutting process can be reduced by 80% than the traditional one-cut process for the small cutting quantity each time. And the edges of the board are quite smooth after cutting.
* because of many times of cutting, the cutting process is very stable, greatly improving the positioning ability of the V-CUT slot. Even if the V-CUT slot is very shallow, there will be no V-CUT slot jumping out of the guide knife, avoiding the bad.
* Unique bar design, can quickly separating the edge of the LED board, for the development of LED aluminum substrate, also suitable for other long strip substrates.
* As the low cutting force of the blade for the aluminum PCB separator , it can prolong the working life of the blades and reduce the cost.
* This PCB separator can separate the LED panel with the component and won’t bend and twist after cutting.
* The platform can be filled with troughs to facilitate the storage of the divided substrates. The platform is optional for1.2 meters and 2.4 meters.
Item
Scope of application
Model number
ASC-700N
Dimensions(L*W*H)
1200*506*333mm (with 1.2M platform)
2400*506*333mm (with 2.4M platform)
Cutting speed
80/120/200/400mm/s
Power
60W
PCB Board thickness
0.2-2.5mm
Maximum PCB board length
Unlimited
Power Supply
1P AC220V 50Hz or 110V/60Hz
Weight
Approx.72Kg
Approx.88Kg
Note: Can customized the bigger cutting module for the LED aluminum board with high component.
Note : Your information detail will not be published. Required fields are marked
