Automatic PCB magazine Unloader
Application:
The Automatic Unloader is designed for
unloading of PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The magazine indexes to the next position and is ready for the following unloading cycle. Connect with SMT and AI production line, safety design ensure not to break any PCB when it is pushed and thus reduce defect rate. Agility operation with high accuracy, automatic counting, fault alarm functions, it is required for a full range of automatic equipment.
Japan Keyence sensor control
LCD touch screen control
Cast aluminum integrated lifting platform
light tower and audible alarm
CE compliance.
2 year parts warranty
Technical Specifications:
Selectable pitch 10mm up to 40mm
Auto/Manual run modes
Diameter 3mm edge round belt
Component clearance: top 80mm bottom 20mm
Power: AC220V/110V, 50/60 HZ, 1 phase
Air Pressure: 5kgf/cm2
PCB Convey Direction: L-R ( Or R-L)
Front rail fixed ( or rear rail fixed)
Conveyor height:900+-20mm( standard height for SMT application)
For AI application, please specify the height requirements
Magazine max pcb width available at 250mm(S), 330mm(M), 390mm(L), 460mm(X)
Model No |
Description |
Magazine Size |
Max PCB Size |
UL250 |
250mm Magazine Unloader |
355x320x563 mm |
350x250 mm |
UL330 |
330mm Magazine Unloader |
460x400x563 mm |
460x330 mm |
UL390 |
390mm Magazine Unloader |
535x460x570 mm |
535x390 mm |
UL460 |
460mm Magazine Unoader |
535x530x570 mm |
535x460 mm |
Order and Shipping Info:
Model No |
Machine Dimension(L×W×H) |
Net Weight |
Shipping Dimension(L×W×H) |
Gross Weight |
UL250 |
1680×765×1200mm |
210 kgs |
1830×930×1420mm |
290 kgs |
UL330 |
1920×850×1200mm |
230 kgs |
2080×1010×1420mm |
320 kgs |
UL390 |
2160×910×1200mm |
270 kgs |
2310×1060×1420mm |
360 kgs |
UL460 |
2160×980×1200mm |
280 kgs |
2310×1130×1420mm |
370 kgs |