8 & 10 Zone Reflow Oven
Application:
Forced hot air reflow oven with eight ( or ten) top and eight ( or ten) bottom heating zones, CR8000(10000) is ideal solution for high volume production. With a maximum temperature of 350 degrees C, CR8000(10000) is compatible with most of lead and lead free solder paste profiles.
Technical Specifications:
Power 3 φ, 380 V, or 3 φ, 220 V, Pin Conveyor Width: Max 450mm
PCB Max Width on mesh : 550mm Height of Conveyor: 900mm+50/-20mm
Conveyor Speed: 0.4～1.8m/min Conveying Direction: L-R( or R-L)
Heating Tunnel Length 2700/3400mm Component Max Height: upper 30mm, lower 25mm
Ramp Up Time ≤25min Temp Range Ambient～350°C
Heating Mode: hot air forced convection Temp Control Mode PID+ SSR
Precision of Temp Control ±1°C Delta T ±2°C
|
Model |
CR8000 |
CR10000 |
|
Heating Zone Qty |
8 ( up and down ) |
10 ( up and down ) |
|
Heating Tunnel Length |
2700mm |
3400mm |
|
Cooling zone Qty |
2 |
2 |
|
Power Consumption |
10～14kw |
11～16kw |
|
Total Power |
60kw |
70kw |
|
Exhaust Vents Qty |
3 |
3 |
|
Exhaust Opening Size |
8"x3 |
8"x3 |
|
Total Exhaust Venting |
390 CFM |
390 CFM |
|
Net Weight |
2000 kgs |
2100 kgs |
|
Gross Weight |
2330 kgs |
2430 kgs |
|
Machine Dimension |
4800(L)×1510(W)×1550(H)mm |
5500(L)×1510(W)×1550(H)mm |
|
Shipping Dimension |
5200(L)x1850(W)x1950(H)mm |
5900(L)x1850(W)x1950(H)mm |
|
Power |
3 φ, 380 V,95A /3 φ, 220 V,160A |
3 φ, 380 V,110A /3 φ, 220 V,190A |
|
Nitrogen Available |
Yes |
Yes |
|
N2 Consumption |
20-35 m3/h |
36-42 m3/h |
|
Oxygen Density |
500-1000 ppm (with N2 only) |
500-1000 ppm (with N2 only) |
