ASCEN
Video Channel
Follow us on
Skype:supplier889 Email:info@ascen.ltd WhatsApp/Line/Phone:8613377777085
PRODUCTS
- PCB separator
- hektor separator/PCB hektor/off-out V-cut separator
- PCB Loaders
- PCB Unloaders
- PCB depaneling
- PCB Conveyors
- PCB Outfeed Conveyor|PCB belt conveyor
- Infeed Conveyor
- AGV car/Guided transfer robot/load efficient/magnetic navigat
- PCB magazine loader
- PCB Buffers
- Component insertion feeder
- Auto Screw Fastening Robot
- Traffic Control Conveyors
- PCB depaneling machine
- Wave Soldering
- Lead Free Reflow Oven
- PCB grooving machine
- solder dross separator
SOLUTIONS
CONTACT US
Email: info@ascen.ltd
Email: info@ascen.ltd
Skype: supplier889
Address: Industrial zone,Chan town,Guangdong province.
SOLUTIONS
PCB cutting machine
2021-08-25 18:21
Item：ASCEN mini PCB cutting machine separation PCBA with high efficiency: mini ASC-900 model
1)ASCEN mini type PCB cutting machine can separate up to 20 PCBs simultaneously,without
deformation and burrs it mainly use for the PCB assembly in the large mass production with the high
efficiency and Most of lighting manufacturer or the PCBA assembly line which in the mess production
will choose this multi cutter type PCB depaneling machine to reduce their labor cost , and then save
their more production cost.
2)Mini type PCBA cutting machine with small volume and you can place this PCB separator in your
desk,which allows them to be placed anywhere when you have space limitations.
3) This a multi cutter PCB cutting machine with high precision,you can get the nice cutting result for
separate the PCB printed circuit board that make of FR4/Aluminum/CEM-1 material after cut.
4)Multi blade PCB cutting machine is very popular to suitable for separate the large quantities of
milled PCBs on the PCB assembly lineMost of time, one set of this mini type PCB separator can
satisfy for production output from the 3-5 SMTassembly line. Almost cover the PCB cutting in the
whole factory. that is why ASCEN mini PCB depaneling machine so popular in the eletronic assembly
manufacturer and the smart factory.
About how to choose PCB cutting machine/PCB depaneling machine quickly separation PCB
board ，it depend on your production output on the line.
If you are the LED light manufacturer, Your can choose ASCEN mini PCB separator cutting the T8
tube strip or PCB panelwhich in the FR4/Aluminum/CEM-1 material. most of LED panel with multi
PCB stripes,the operator need separate up to 20 PCBs in every PCB panel, multi cutter type PCB
depaneling machine use for your PCB panel only need 5 second to finish, and only need one operator
to finish, that is greatly for save the time and with the high efficiency, if your factory in the mess
production, this mini 900 model is the best way to save our more production cost.
To compare the single cutter type PCB depaneling machine, Please check
the ASC-700N series PCB cutting machine, this PCB cutting machine only cut the PCB board one
by one.mutli cutter PCB depaneling machine have the higher precision and higher efficiency than
ASC-700N series machine, single cutting type ASC-700N series machine cut the PCB one by one,
and the multi cutter type 900 machine can cut the whole PCB at one time. you can compare this both
machine like following:
If your PCB has 10 V-cut, the production efficiency for one set 900 machine = 10 sets of 710
machine simultaneous operation. add 10 workers cost, but the ASC-900 machine only need one
operator labor cost,so the multi cutter type PCB depaneling machine will save your more cost in
the future.
Of course, if your factory with the low output, ASC-700N series PCB cutting machine is best
choose for you.
1)ASCEN mini type PCB cutting machine can separate up to 20 PCBs simultaneously,without
deformation and burrs it mainly use for the PCB assembly in the large mass production with the high
efficiency and Most of lighting manufacturer or the PCBA assembly line which in the mess production
will choose this multi cutter type PCB depaneling machine to reduce their labor cost , and then save
their more production cost.
2)Mini type PCBA cutting machine with small volume and you can place this PCB separator in your
desk,which allows them to be placed anywhere when you have space limitations.
3) This a multi cutter PCB cutting machine with high precision,you can get the nice cutting result for
separate the PCB printed circuit board that make of FR4/Aluminum/CEM-1 material after cut.
4)Multi blade PCB cutting machine is very popular to suitable for separate the large quantities of
milled PCBs on the PCB assembly lineMost of time, one set of this mini type PCB separator can
satisfy for production output from the 3-5 SMTassembly line. Almost cover the PCB cutting in the
whole factory. that is why ASCEN mini PCB depaneling machine so popular in the eletronic assembly
manufacturer and the smart factory.
About how to choose PCB cutting machine/PCB depaneling machine quickly separation PCB
board ，it depend on your production output on the line.
If you are the LED light manufacturer, Your can choose ASCEN mini PCB separator cutting the T8
tube strip or PCB panelwhich in the FR4/Aluminum/CEM-1 material. most of LED panel with multi
PCB stripes,the operator need separate up to 20 PCBs in every PCB panel, multi cutter type PCB
depaneling machine use for your PCB panel only need 5 second to finish, and only need one operator
to finish, that is greatly for save the time and with the high efficiency, if your factory in the mess
production, this mini 900 model is the best way to save our more production cost.
To compare the single cutter type PCB depaneling machine, Please check
the ASC-700N series PCB cutting machine, this PCB cutting machine only cut the PCB board one
by one.mutli cutter PCB depaneling machine have the higher precision and higher efficiency than
ASC-700N series machine, single cutting type ASC-700N series machine cut the PCB one by one,
and the multi cutter type 900 machine can cut the whole PCB at one time. you can compare this both
machine like following:
If your PCB has 10 V-cut, the production efficiency for one set 900 machine = 10 sets of 710
machine simultaneous operation. add 10 workers cost, but the ASC-900 machine only need one
operator labor cost,so the multi cutter type PCB depaneling machine will save your more cost in
the future.
Of course, if your factory with the low output, ASC-700N series PCB cutting machine is best
choose for you.
PCB separator Features:
* The distance between upper and lower cutter can be precisely adjusted, the separating
thickness of PCB range is : 0.8MM-3.0MM.
* Suitable cutting material of PCB :aluminum ,FR4,glass fiber.
* This automatic PCB separator with 2 cutting module and 3 cutting module optional via the PCB
board material.The whole cutting process is divided into 2 or 3 stages. The stress of the cutting
process can be reduced by 80% than the traditional one-cut process for the small cutting quantity
each time. And the edges of the board are quite smooth and won’t bend and twist after cutting.
board material.The whole cutting process is divided into 2 or 3 stages. The stress of the cutting
process can be reduced by 80% than the traditional one-cut process for the small cutting quantity
each time. And the edges of the board are quite smooth and won’t bend and twist after cutting.
* Unique bar design, can quickly separating the edge of the LED board and the PCBA, for the
development of the PCBA with high component , also suitable for other long LED panel with the
Aluminum meterial.
development of the PCBA with high component , also suitable for other long LED panel with the
Aluminum meterial.
| Item | Scope of application |
|
Model number (PCB separator) |
Customized ASC-900C |
| Dimensions(L*W*H) | 650*570*250mm |
| Cutting speed | 200-400mm/s |
| Power | 200W |
| PCB Board thickness | 0.2-3mm |
| Maximum PCB board length | Unlimited |
| Maximum cutting width | 180mm |
| Minimum cutting width | 8mm |
| Minimum cutting length | 250mm |
| Working temperature | 10-35 degree |
| PCB maximum component height | 15mm |
| Power Supply | 1P AC220V 50Hz or 110V/60Hz |
| Weight | Approx.98Kg |
|
Note: 1.Can customized the bigger cutting width for the PCB board with high component. 2.Can customized 3 cutting module for your PCB board with better cutting effect 3.Can customized this multi blade PCB separator with the automatic version to connect the automatic SMT line. |
|
Contact Details
Whether you'd like to get more info on what,why and how we do what we do, need help with what you're creating,would line to partner up or just say hi!
—--- We'd love to hear from you.
Note : Your information detail will not be published. Required fields are marked*
ASCEN
ASCEN
ASCEN