PCB separator quickly adjust PCB depaneling width_PCB separator,PCB depaneling machine,auto pcb V-cut separator,PCB cutting machine,PCB Depanelizer,pcb router equipment,MCPCB depaneler

PRODUCTS

SOLUTIONS

Email: info@ascen.ltd

Skype: supplier889

Address: Industrial zone,Chan town,Guangdong province.

SOLUTIONS

Why choose ASCEN PCB depaneler ASC-620 depaneling machine

Multi-strip PCB depaneler and PCB depaneling set up manual

PCB depaneling machine quickly adjust multi-strip LED board width

View ASCEN system catalog Download

PCB separator quickly adjust PCB depaneling width

2019-08-19 01:29

PCB cutting machine manual for quickly adjust PCB depaneling width

PCB separator depaneling PCB

PCB separator with the width changeover devise that can through the cylinder expansion principle to control the fix tray to achieve the fast changeover the PCB depaneling width.

When your PCB board with different V-cut width, use this type PCB cutting machine can changeover the cutting width quickly, can greatly to save your more time for depaneling operation. For example, if you PCB board with the PCB edge,use the standard PCB cutting machine, you need manual to adjust the fix tray to suitable for your PCB edge width and your PCB stripes width again and again. This type machine can help you avoid the repetitive adjustment operation and avoid the wrong happen during your adjustment.

Width Adjustment choose:

Max.5-30mm width

Max.5-70mm width

Max.5-100mm width

(the user can choose the width adjust range via your PCB stripes width)

The key adjustment button as following:
PCB separator machine

Please check the following PCB separator operation video for adjust different PCB board width according the following manual detail

1, Connect the air to the filter tap

V-cut depaneling machine

2, Loose the screw on the right side and the left side, total 4 pieces of screw for ready to adjustment.

PCB depanelizer

3, Check the following picture as the PCB sample.
PCBA separator

There is total 2 PCB width need to adjust, one width is 10mm as the PCB edge, another width is the 15mm as the PCB stripes. At first, we start to adjust the less PCB width 10mm.

(note: the above video operation, because the sample PCB without the less PCB width, the operator adjust the bigger PCB at first,that is depend on your pcb board)

1)Put the PCB board into the machine, and the three upper blade into the V-cut .

2)Adjust the Knob A of right side and left side to let the gap more and more small until satisfy the width A.

T8 tube PCB separator

3)Cut off the PCB edge(width A), and then put the PCB board into the machine,let the blade into the V-cut of width B, and fix the width B, the next step to adjust the knob B of right side and left side,to let the fix tray satisfy for the width B.(same as the last step)

PCB cutting machine

4,When finish this 2 type width adjustment, please place the pcb board into the machine and try to cut again and again, and further confirm the width adjustment whether ok for the PCB board.

5,When finish the above adjustment, please tighten this 4 piece of screw on the right side and left side, and then start to normal work.

LED board separator

Have you alreadly understand to use this type PCB separator to quickly adjust your PCB depaneling width?Any more question please sent the inquiry to ASCEN team.

This customized PCB separator detail pleae check the link for: Customized PCB separator detail

Contact Details

Whether you'd like to get more info on what,why and how we do what we do, need help with what you're creating,would line to partner up or just say hi!

—--- We'd love to hear from you.

Tel:8613377777085

Email:info@ascen.ltd

Skype:supplier889